So you have just received the Inmotion L9 electric scooter that you have been waiting for, however, you have just noticed that the device requires assembly. Thankfully, this is a very nice process and shouldn't take any longer than a few moments.
If you follow the steps below, your Inmotion L9 should be up and running in absolutely no time!
How do I assemble the Inmotion L9?
Step One: Please remove the handlebars from the polystyrene of the box and attach this to the stem of the scooter.
Step Two: Included with your device will be an arrangement of allen key screws which hold the handlebars to the stem. Using five of these screws, please securely attach the handlebars of the scooter to it's stem. With the final two screws, please attach the locking clip to the back of the scooter stem.
Step Three: Now the motor of the scooter can be removed from the polystyrene and slid through the main frame of the scooter.
Step Four: With the motor in place, please slide the chrome coloured washer onto the stem of the motor. This will rest in the cavity where the motor sits in the main chassis of the scooter.
Step Five: The larger black washer can now be slid on top of the chrome coloured washer. This is usually a much tighter fit so some force may be required.
Step Six: With the black washer in place, the main stem of the scooter can be slid onto the motor stem. This will be quite loose until the next step is completed.
Step Seven: For this next step to be completed, the scooter stem will still need to be folded down. Included with your device should be a black washer with a gap for an allen key screw. This allen key screw will hold the steering stem of the scooter to the motor. Please place this in the cavity of the folding mechanism and tighten the allen head screw. Please do not overtighten this screw.
Step Eight: Now the steering stem and motor can be securely attached to the chassis of the scooter. Before we move onto the next step, it would certainly be worth checking that the scooter still turns on as it should.
Step Nine: Using the locking clip on the stem of the scooter, please fold the stem of the device down. In this final step we will be aligning the front wheel with the handlebars. Please make sure that the front wheel is aligned with the handlebars and tighten the two chrome coloured hex head screws on the folding mechanism of the scooter. Your scooter should now be completely assembled.
But I have more questions, where do I go?
If you have any further questions regarding what has been said in this article, please don't hesitate to submit a ticket with ourselves and one of our customer service agents will be with you shortly.